Belkin 802.11g - Manual (Page 25)

CONNECTING THE BRIDGE USING THE WEB-BASED INTERFACE
22
Password
The Bridge ships with NO password entered. If you wish to add a password for
greater security, you can set a password here. Write down your password and
keep it in a safe place, as you will need it if you need to log into the Bridge in
the future.
Login Timeout
The login timeout option allows you to set the period of time that you can be
logged into the Bridge’s Web-Based Setup Interface. The timer starts when
there has been no activity. For example, you have made some changes in the
Web-Based Setup Interface, and then left your computer alone without
clicking “Logout”. Assuming the timeout is set to 10 minutes, then 10
minutes after you leave, the login session will expire. You will have to log in
to the Bridge again to make any more changes. The login timeout option is
for security purposes and the default is set to 10 minutes.
Note: Only one computer can be logged into the Bridge’s Web-Based Setup
Interface at one time.
P74397_F5D7330_man.qxd 10/28/03 10:08 AM Page 22