Belkin 802.11g - Manual (Page 19)

CONNECTING THE BRIDGE USING THE WEB-BASED INTERFACE
16
b
c
d
a
e
f
g
h
i
j
k
l
Bridge Settings
a. Bridge Name
Enter the name of your Wireless Ethernet Bridge here.
b. IP Configuration:
• Manually set the Bridge’s IP address - The default IP address of your Bridge
is 192.168.2.225. You can modify it to match your network subnet if needed.
For example, if your network subnet is under 192.168.1.xxx, then you can
configure the Bridge to use 192.168.1.225.
• Obtain an IP address from a DHCP server - If you have a DHCP server or a
router in your network, you can choose to “obtain an IP address automatically
from a DHCP server”. The IP address of your Bridge might changes after
selecting this option.
c. IP Address:
The IP address must be unique to your network. Default IP address is
192.168.2.225.
d. Subnet Mask:
The Bridge’s subnet mask must be the same as your network’s subnet mask.
P74397_F5D7330_man.qxd 10/28/03 10:08 AM Page 16