Purenex Multipure Aquaperform For Model MP880SB - Manual (Page 22)

Performance Data Sheet
Multi-Pure Drinking Water Systems have been tested and certified under NSF/ANSI Standard Nos. 53 as
shown below. The concentration of the indicated substances in water entering the system was reduced to a
concentration less than or equal to the permissible limit for water leaving the system, as specified in
NSF/ANSI 53, Health Effects.
For Model Nos. MP880SB, MP880SC, MP880SI, MP880EL
22
X V. P e r f o r m a n c e D a ta S h e e t
Substance
Percent
Reduction**
Influent challenge
concentration
Maximum
permissible product
water concentration
ALACHLOR*
>98%
0.05 0.001
ARSENIC (pentavalent As (V); As (+5); arsenate @ 6.5 pH >99.9% 0.050 +/- 10% 0.010
ARSENIC (pentavalent As (V); As (+5); arsenate @ 8.5 pH >95.8% 0.050 +/- 10% 0.010
ASBESTOS
>99.9%
10 7 to 10 8 fibers/L; fibers
greater than 10 micrometers in
length
99% reduction
requirement
ATRAZINE* >97% 0.1 0.003
BENZENE*
>99%
0.081 0.001
BROMODICHLOROMETHANE (TTHM)* >99.8% 0.3 0.015
BROMOFORM (TTHM)* >99.8% 0.3 0.015
CARBOFURAN (Furadan)* >99% 0.19 0.001
CARBON TETRACHLORIDE* 98% 0.078 0.0018
CHLORDANE >99.5% 0.04 +/-10% 0.002
CHLOROBENZENE (Monochlorobenzene)* >99% 0.077 0.001
CHLOROPICRIN* 99% 0.015 0.0002
CHLOROFORM (TTHM)* (surrogate chemical) >99.8% 0.45 +/- 20% 0.080
Cryptosporidium (CYST) >99.99% minimum 50,000/L 99.95%
CYST (Giardia; Cryptosporidium; Entamoeba;
Toxoplasma)
>99.99%
minimum 50,000/L 99.95%
2, 4-D* 98% 0.11 0.00017
DBCP (see Dibromochloropropane)* >99% 0.052 0.00002
1,2-DCA (see 1,2-DICHLOROETHANE)* 95% 0.088 0.0048
1,1-DCE (see 1,1-DICHLOROETHYLENE)* >99% 0.083 0.001
DIBROMOCHLOROMETHANE (TTHM;
Chlorodibromomethane)*
>99.8%
0.300 0.015
DIBROMOCHLOROPROPANE (DBCP)* >99% 0.052 0.00002
o-DICHLOROBENZENE (1,2 Dichlorobenzene)* >99% 0.08 0.001
p-DICHLOROBENZENE (para-Dichlorobenzene)* >98% 0.04 0.001
1,2-DICHLOROETHANE (1,2-DCA)* 95% 0.088 0.0048
1,1-DICHLOROETHYLENE (1,1-DCE)* >99% 0.083 0.001
CIS-1,2-DICHLOROETHYLENE* >99% 0.17 0.0005
TRANS-1,2- DICHLOROETHYLENE* >99% 0.086 0.001
1,2-DICHLOROPROPANE (Propylene Dichloride)* >99% 0.08 0.001
CIS-1,3- DICHLOROPROPYLENE* >99% 0.079 0.001
DINOSEB* 99% 0.17 0.0002
EDB (see ETHYLENE DIBROMIDE)* >99% 0.044 0.00002
ENDRIN* 99% 0.053 0.00059
Entamoeba (see CYSTS) 99.99% minimum 50,000/L 99.95%
ETHYLBENZENE* >99% 0.088 0.001
ETHYLENE DIBROMIDE (EDB)* >99% 0.044 0.00002
**Percent reduction reflects actual performance of Multi-Pure product as specifically tested (at 200% of capacity).
Percent reduction shown for VOCs* reflects the allowable claims for Volatile Organic Chemicals/Compounds as per
Tables. Chloroform was used as a surrogate for VOC reduction claims: the Multi-Pure Systems’ actual reduction rate
of Chloroform was >99.8% as tested (at 200% of capacity).