BT Synergy 2150 User Manual

Page 47

Synergy 2150 - Edition 7 – 30th May ’00

Please note

If the registration process fails, the

handset display shows Not SUB and

you should begin the process again.

Press buttons in the order shown

You can use your handset to
de-register another handset
from a base station. You
cannot de-register the
handset you are using from
the base station you are using.

Until display flashes Base
setting

PIN

Enter the 4-digit base station
PIN, the pre-set PIN is 0000.

Until the display shows

Remove HS

Until the handset number
you want to de-register is
flashing.

To confirm.

You will hear a confirmation
tone and the display will
return to Remove HS.

To de-register a handset

Press the

INT

button. Display

shows the INT symbol and

Internal

Enter the handset number
you want. Display shows
the number and the called
handset rings.

Press the

END

button to end

the call.

Your caller is put on hold and
you hear the dialling tone.

KEYPAD

Enter the handset number to
which you want to transfer
the call. When the handset is
answered

The call is transferred.

If the handset is not
answered, press the

INT

button to speak to the
caller again.

To call another handset

To transfer an external call to
another handset

Options

Int

Del

Options

Del

The handset is automatically
registered with the next
available handset number.
This number is shown on the
display as

HS 2

ADDITIONAL HANDSET

Synergy 2150 user guide 31/5/00 10:41 Page 41