BT Synergy 2150 - Manual (Page 27)

Press to open the main menu.
Press the UP and DOWN
arrows until the display
flashes TAM Settings.
Press the OPTIONS button
to confirm.
Press the UP and DOWN
arrows until the display
flashes Day/Time.
Press the OPTIONS button
to confirm.
Display will show
Day: 1234567
Time: 00:00
Use to scroll through 1 Mon,
2 Tues, 3 Wed, 4 Thurs,
5 Fri, 6 Sat, 7 Sun or press
the number on the keypad.
Press the OPTIONS button
to confirm.
Enter the time using the
24 hour clock. So for 14:52
type
1452 on the keypad.
Press the OPTIONS button
to confirm.
You will then hear the
confirmation beeps.
22
Synergy 2150 - Edition 7 – 30th May ’00
USING Y
OUR ANS
WER MA
CHINE
Options
To set the day and time
Del
Del
Del
Options
Options
Options
Options
Please note
It is important to set the Day and
Time in preparation for using your
answering machine.
Please note
If your Synergy 2150 is disconnected
from the power, for example during
a power cut, when power is restored
the display will show Searching...
followed by the idle screen and the
green power light on the base
will flash.
You will not have lost your messages
but you will need to set the day and
time again.
Once this is completed the green
power light on the base will no
longer flash.
Synergy 2150 user guide 31/5/00 10:40 Page 21