BT Synergy 2150 - Manual (Page 30)

Synergy 2150 - Edition 7 – 30th May ’00
USING Y
OUR ANS
WER MA
CHINE
25
You can select the number
of rings from 2, 4 or 6 before
incoming calls are answered.
Press to open the main menu.
Press until the display flashes
TAM setting
.
Press the OPTIONS button
to confirm. Waiting will flash
for one second and then
Speaker
will flash.
Until Ring counts is
flashing.
Press the OPTIONS button
to confirm.
Display shows Ring counts
2 4 6
.
Until the number of rings
you want is flashing.
Press to confirm.
Options
Options
Options
Options
Del
Del
Del
To adjust the number of rings
before incoming calls are
answered
When the number of rings
is set to 4, the Synergy 2150
will answer after 2 rings if
new messages are left, and
after 4 rings if there are no
new messages. This is for
use during remote access,
see page 29,
Time saver Please note
Deleting your own announcement
restores the original pre-recorded
message.
When listening to your
messages:
Press the OPTIONS button
until display shows Volume
0 1 2 3 .
To select the volume. 0 is off,
1 is quiet and 3 is loud.
Press the OPTIONS button
to confirm.
Options
Del
Options
To adjust the base speaker volume
When listening to your
messages:
Press for 1 second.
The indicates that the
loudspeaker is on.
If it is missing then the
loudspeaker is off.
To turn the handset speaker
on or off
Synergy 2150 user guide 31/5/00 10:40 Page 24