Belkin Wireless G Travel Router F5D7233 - Manual (Page 45)

Using the Web-Based Advanced User Interface
43
se
ct
io
n
2
1
3
4
5
6
7
8
9
10
11
128-Bit WEP Encryption
1.
After selecting your WEP encryption mode, you can enter
your key by typing in the hex key manually, or you can type a
passphrase in the “Passphrase” field and click “Generate” to
create a key.
A hex (hexadecimal) key is a combination of numbers and letters
from A–F and 0–9. For 128-bit WEP, you need to enter 26 hex keys.
For instance: C3 03 0F AF 0F 4B B2 C3 D4 4B C3 D4 E7 = 128-bit WEP key
2. Click “Apply Changes”. Encryption in the Router is now set. Each
of the computers on your wireless network will now need to be
configured with the same security settings.
WARNING:
If you are configuring the Wireless G Travel Router or
access point from a computer with a wireless client, you will need to
ensure that security is turned ON for this wireless client. If this is not
done, your client will lose its wireless connection.