Belkin Wireless G Travel Router F5D7233 - Manual (Page 16)

14
Connecting and Configuring your Router Connecting and Configuring your Router
2.1
Connect one end of the included
Ethernet cable into the Router and
the other end into a hotel’s Internet
connection or a cable/DSL modem.
Next, plug the included power
supply into the Router, and then
click “Next”.
2. Connect Connecting the Router’s Cables . Connect Connecting the Router’s Cables
2.2
From your PC, wirelessly connect
to the Router using your PC’s
built-in wireless card or external
wireless adapter. The network
name (SSID) of the Router is
“Belkin Traveler”. Once you have
connected wirelessly, click “Next”.
2.3 Select one of the following:
Hotel Connection
– Select “Hotel
Connection” if you are in a hotel.
CLICK “NEXT” AND FOLLOW THE
INSTRUCTIONS IN STEP 3.
Cable/DSL Connection
– If you
are using a cable/DSL modem,
select “All Other Connections”.
CLICK “NEXT” AND FOLLOW THE
INSTRUCTIONS IN STEP 4.