MTS Series 322 Load Frames - Manual (Page 36)

Series 322 Load Unit 36 Safety
Force Transducer
model s/n
cpty
kN lbs
! Warning
High force moving parts. Can cause
severe injury or equipment damage.
Stay clear and use eye protection
while test is in progress. Read
instructions before operating or
servicing.
! Warning
If lift cylinder line is opened, air
may enter, causing crosshead to
drop when unlocked. Bleed both
cylinders before unlocking
crosshead.
Service Manifold
model no.
s/n
ass’y no. rev.
3000 psi 20.7 MPa
Piston Accumulator
pressure psi
MPa
model s/n
! Danger
Nitrogen under pressure. Do not
test or disassemble without
adequate instructions.
Load Unit
model no.
part no. rev.
serial no.
force cpty.
mg. date
Rear