Bradford White Everhot TG-150I-N(X) - Manual (Page 41)

41
To Connect the Exhaust Vent:
Refer to the venting manufacturer’s installation instructions for the specific exhaust vent system.
Horizontal Discharge for TG-237I Models
The air intake must be located in relation to the exhaust, as shown below. The air intake must angle ¼”
per foot to the termination to prevent entry of rain. The vent termination and air intake must be in the
same pressure zone and face the same direction.
8 ”
6 ”
Intake
Optional
Intake
Vent
4 3
1 2
Figure 35. Illustration Showing the Installation of the Air Intake.
Figure 36. Relationship Between Air Intake and Vent for TG-237I Models.