Bradford White Everhot TG-150I-N(X) - Manual (Page 37)

37
Measure Dimension to Fit
Figure 29. Illustration Showing How to Determine the Proper Length for the Wall Discharge Terminal.
Figure 30. Illustration Showing How to Properly Cut a Vent Extension.
NOTICE
If the vent system is shorter than 5 ft (1.52 m) and the condensate collector is not used, be sure to install
the wall terminal with a 1° angle to the outside of the building.
NOTICE
The minimum outer cap length is 3.5 in. (90 mm). If needed, the length outside the wall may exceed this
dimension.