Black Box PROTOCOL CONVERTER A/S-4 - Manual (Page 38)

CHAPTER 6: Power Up and Configuration Menu Options
37
6.9.1 PF K EYS
Selection of item B from the menu shown in Figure 9 will cause the menu shown in Figure 10 to be
displayed.
If the operator wants to use a different key for PF2, he would first enter the letter “C” and then enter the
new value(s) in response to prompt(S) for the new value(s). The key sequences entered for the PF keys
must be either control or escape sequences to work properly, and any specific key sequence must be
entered for only one key. After a new value has been entered, the menu will be redisplayed and will
show the new value(s).
CURRENT:
Application = SDLC/SNA 3274/76 Interactive
VDU = ANSI STD; DEC VT100; Teletype 5410, 5420; Televdeo 970, 960
Keyboard = STANDARD
Change: PF Keys (Keys Typed on VDU to Perform Function)
A-Exit B-ESC Q or ESC q=PF1
C-ESC W or ESC w=PF2 D-ESC E or ESC e=PF3
E-ESC R or ESC r=PF4 F-ESC T or ESC t=PF5
G-ESC Y or ESC y=PF6 H-ESC U or ESC u=PF7
I-ESC I or ESC i=PF8 J-ESC O or ESC o=PF9
K-ESC P or ESC P=OF10 L-ESC A or ESC a=PF11
M-ESC S or ESC S=PF12 N-ESC D or ESC d=PF13
O-ESC F or ESC f=PF14 P-ESC G or ESC g=PF15
Q-ESC H or ESC h=PF16 R-ESC J or ESC j=PF17
S-ESC K or ESC k=PF18 T-ESC L or ESC l=PF19
U-ESC ; or =PF20 V-ESC Z or ESC z=PF21
W-ESC X or ESC x=Pf22 X-ESC C or ESC c=PF23
Y-ESC V or ESC v=PF24
Enter Letter:
Figure 10