MMF POS Advantage Series Under Counter Brackets Mounting - Manual

MMF CASH DRAWER
Advantage Series Advantage Series ™ ™
Under Counter Brackets Mounting Instructions
Mounting Steps:
STEP 1 Pre-drill six (6) holes for the #12 wood screws under surface of
counter where unit will be installed. Each bracket takes three
holes 4” apart. Distance in between the bracket depends on the
Cash Drawer’s width, please measure before drilling. CAUTION:
Do not drill through counter.
STEP 2 Secure the two (2) under counter brackets (ITEM A) against
bottom surface of counter by using six (6) No.12 -5/8” Pan Head
Phillips Wood Screws (ITEM B) and six (6) Washers, 1/4 SAE Zinc
Plated Flat (ITEM D) .
STEP 3 Slide cash drawer unit over brackets and align the four (4) holes
under cash drawer with the four holes of the brackets to secure
bottom of the cash drawer to the brackets.
STEP 4 Secure cash drawer unit to brackets using the four (4) #6 -3/8”
Type AB Pan Head Screws (ITEM E) and four (4) Washers, (.156
I.D. x .312 O.D. x .035) (ITEM C).
KIT PART# 226199UCBK1004
SPECS:
• Color: Black
• Material: Steel
• Length: 12.00”
• Height: 5.146”
4 (ITEM E) SCREW, #6 - 3/8", TYPE AB PAN HEAD
6 (ITEM D) WASHER, 1/4 SAE ZINC PLTD FLAT
4 (ITEM C) WASHER, (.156 I.D. x .312 O.D. x .035)
6
(ITEM B) WOOD SCREW, #12 - 5/8" PAN HEAD
PHILLIPS
2
(ITEM A) UNDERCOUNTER MOUNTING
BRACKET
Image Qty Kit Includes:
For replacement parts and/or additional accessories, contact your supplier or visit our website at http://www.mmfcashdrawer.com
For full set of instruction on the Advantange Series visit http://www.mmfcashdrawer.com .
P/N: 531917100
4”
4”
Checkout Counter
(A)
(B & D)
Distance in between the bracket depends on the Cash Drawer’s width.
COPYRIGHT ® BY MMF
CASH DRAWER COMPANY,
WHEELING, ILLINOIS