MMF POS Hypercom/Equinox T4200 - Handheld - Manual

Transaction Terminal Stand (P/N:225 Transaction Terminal Stand (P/N:225--7590 7590--04) 04)
Quick Installation Instructions
Designed for Hypercom® T4200 Handheld
INSTALLATION
1. Remove stand from packaging box. Firmly secure the
base pole by bolting four (4) screws through the base
plate to a flat counter surface. (Screws are not
included as they need to suit your specific desktop or
platform thickness) .
2. Mount payment terminal to stand by sliding in place
the
Hypercom® T4200 Handheld unit, secure in
place by placing the bracket with two hooks at the top
of the stand’s mounting plate. Align the bracket with
the two slot openings at the top feet of the
Hypercom® T4200 Handheld unit as shown in the
left side image.
3. Secure the terminal by tightening the two button head
cap screws on the bracket from behind the mounting
Basic Overview
Note: Images are not to scale.
Clearance
Cable Slot
Thumb
Screw
2” Height Stand
P/N:225 P/N:225--7590 7590--04 04
Bottom Bottom
Top Top
Cable Management
Hole
Bracket with hooks
to secure
Hypercom® T4200
Handheld terminal
in place (Screws
included in kit)
cap screws on the bracket from behind the mounting
plate using the Allen Wrench provided in the kit.
4. Secure the stand’s tilt adjustment as desired by
tightening the two side thumb screws on the
mounting plate on each side of the stand.
5. Make cable connections as needed . Guide cable
connections down and out through the bottom
opening.
For parts and/or additional accessories, contact your supplier or visit our website at www.mmfpos.com
TTS-10 Inst . Sheet (11-6-2011)
COPYRIGHT BY MMF POS
COMPANY, WHEELING, IL
TOOLS AND HARDWARE REQUIRED
• One (1) Allen Wrench is included with kit to tighten the
button head cap screws from behind the mounting plate.
• NO other hardware or tools are included for mounting
stands to a surface. Hardware will need to suit your
specific desktop or platform thickness.
• Phillips Head Screwdriver or power drill will be required
to mount stand to surface (if necessary).
R
e
p
la
c
e
m
e
n
t
P
a
r
t
s
Thumb Screw
P/N: 225-76901-04
SPECS
Rotation: 180°around display pole
Overall Height & Tilt Adjustment (without Terminal) :
•30⁰ Tilt= 4 ¾” high
•45⁰ Tilt= 5 ½” high
Pole Diameter: 2”
Base Dimensions: 5” x 5”
Construction: 18 gauge Steel
Finish: Textured powder coat
Cable Management: Designed with openings for easy and convenient
cable access and routing.
Color: Black
Designed for
Hypercom® T4200 Handheld