MMF POS VESA DISPLAY POLE HIGH TELESCOPIC 18 - 30 - Manual

INSTALLATION
1. Remove Pole Display from packaging. Secure the base pole
tightly in place by bolting four (4) screws through the base plate to
a flat surface or by using the side-mount bracket.
2. Release the two side thumb screws and remove the top extension
pole by pulling it up.
3. Secure the mounting plate on top of the extension pole to the
back of the flat screen monitor by placing four (4) screws to the
corresponding VESA mounting dimension (75mm or 100mm).
4. With the monitor safely secured to the plate, place the top
extension pole back in the cavity of the base pole.
5. Secure the height by tightening the thumb screws located in each
side of the base pole.
6. Secure the monitor’s tilt adjustment by tightening the two screws
on each side of the U-Bracket Support behind the Mounting Plate.
7. Guide cable connections from behind the monitor through the top
cable hole and to the bottom opening of the base pole.
8. Make cable connections as needed.
FLEXIBLE POLE DISPLAY 18"-30” HIGH
P/N: 225-76120-04
Quick Installation Instructions
GENERAL SPECIFICATIONS
Rotation: 360° around display pole
Height: 18-30 inches (45.72cm - 76.2cm)
Tilt Adjustment: +/- 180°
Pole Diameter: 2 inches (Base)
Maximum Load: Designed for LCD monitors / touch-screens weighting
up to 30 lbs (13.60kg)
Display: Designed for VESA 75mm or 100mm mounting standard
Mounting Options: Flat surface or on side-mount bracket
Cable Management: Designed with top and bottom openings for easy
and convenient cable routing.
Color: Black
Please visit MMF 326 on-line for FREE Technical Support or call 1-800-769-1954.
NOTE: For replacement parts and/or additional accessories, contact your supplier or visit our website at http://www.mmf SRV.com
TOOLS AND HARDWARE REQUIRED
• Hardware is NOT included. Hardware will need to suit desktop
or platform thickness.
• Phillips Head Screwdriver or power drill (if necessary)
Mounting
Plate
Top
Extension
Pole
Base Pole
Thumb
Screw
U-Bracket
Support
Cable Hole
Side
Mounting
Bracket
Thumb
Screw
4” Display
Arm O
p
tio
n
s
/R
e
p
la
c
e
m
e
n
t
P
a
rt
s
P/N: 225-76140-04
P/N: 225-76130-04
P/N: 225-76901-04
18"-30" VESA Display Pole Instruction Sheet ( 12/2009 Rev.1)