MK Diamond MK-6000 Series - Manual (Page 10)

10
MK-6000 Concrete Saw Decal Sheet, Part no. 166009
Decal C
Decal D, e & G
Decal F
Decal a Decal B
Decal H
Decal J
Decal K
Decal i
Read entire operatorʼs manual before operating this
machine. Understand all warnings, instructions and
controls. IF YOU DO NOT HAVE AN OPERATORʼS
MANUAL, CALL TOLL FREE 1-800-474-5594
Machinery Hazard - Always keep all guards in place
and in good condition. Always keep all parts of your
body away from blade and all other moving parts.
Never allow blade exposure to exceed 180°.
Always use blades with a rated speed above the
blade shaft speed. Excessive speed can cause blade
breakage. Verify speed by checking blade shaft RPM,
pulley diameters and blade flange diameter.
Never use damaged
blades or equipment.
Never operate this machine
in areas of combustible material.
Some dust created by power sanding, sawing,
grinding, drilling, and other construction activities
contains chemicals known (to the State of California)
to cause cancer, birth defects or other reproductive
harm. Some examples of these chemicals are:
• Lead from lead-based paints
• Crystalline silica from bricks and
cement and other masonry products
• Arsenic and chromium
from chemically-treated lumber
Always wear safety approved hearing,
eye, head and respiratory protection
WARNING
DanGer
Lethal exhaust
gases. Use only
in well ventilated
areas. DO NOT
use indoors.
Caution
Keep
hands and
feet clear.
!
Decal B
notiCe
Overtensioning of belts
will result in premature
crank and/or bearing failure.
!
MK-6000 SaW SaFetY LaBeLS
SaFetY LaBeL
Safety labels contain important safety information. Please read the information contained on each
safety label. These labels are considered a permanent part of your saw. If a label comes off or
becomes hard to read, contact MK Diamond or your dealer for a replacement.
For manuals and parts
lists scan the qr code
with your smart phone