beautypg.com

Unpacking, transport & assembly – MK Diamond BX-4 User Manual

Page 13

background image

BX-4

13

UNPACKING, TRANSPORT & ASSEMBLY

2. DIAMOND BLADE INSTALLATION:

• Identify Motor Shaft, Retaining Screw (1) and Outer
Flange (2).

• Hold Shaft Wrench (3) stationary. Rotate Blade
Wrench (4) counter-clockwise. Remove Retaining
Screw and Outer Flange.

• Seat Blade (5) on Inner Flange (6). Verify rotation
direction of blade.

• Hold Shaft Wrench (3) stationary. Rotate Blade
Wrench (4) clockwise. Install Retaining Screw (8)
and Outer Flange (7) & tighten.

NOTE

When installing the Retaining Screw, do not “cross-thread”
and DO NOT over tighten the screw.

2

Motor
Shaft

1

3

6

3

4

5

8

7

4

See also other documents in the category MK Diamond Power saws: