MK Diamond MK-660 - Manual (Page 27)

27
MK-660 tile saw CleaNUP
(J)
Turn the motor OFF when
work is complete
CleaNUP
NOte: 1. If an external water source was used, steps A through C may be skipped.
2. Dispose of wastewater in accordance with applicable Federal, State and Local laws.
(A)
Clean the Water Pump suc-
tion of all debris
(B)
Place the Water Pump in an
external container
(C)
Run the MK-660 Saw until clear
water is seen at the blade coolant
ports (Approx. one (1) minute)
(D)
Ensure the ON/OFF switch is
in the OFF position
(E)
Unplug the GFCI from the
power source
(F)
Unplug MK-660 from the
GFCI
Ensure the saw is disconnected before completing the remnder of the cleanup
process.
CaUtiON