Metal Sales TL-21 - Manual (Page 3)

PF/I-3
F
lush
F
ace
/ I
nterIor
l
Iner
s
erIes
© Metal Sales Manufacturing Corporation/ Subject to change without notice/ Effective Date 9/11
800.406.7387 (Corporate Office) • www.metalsales.us.com
Tl-19a
and
Tl-21 P
anel
o
verview
C
1 1 /
2
"
24" Coverage
16" Coverage
3"
7 /
8
"
2 15 /
16
"
C
1 1 /
4
"
11 /
16
"
TL-19A PANEL PROFILE
TL-21 PANEL PROFILE
1 7 /
16
"
SUBSTRATE
COVERAGE
LENGTH
AVAILABILITY
APPLICATION
FASTENING SYSTEM
FASTENERS
MATERIALS
FINISH
Liner panels are available in a 16" (TL19A) or 24" (TL21) widths with 1 7 /
16
" (TL19A) or 2 15 /
16
" (TL21) heights.
Liner
Liner panel is designed to be utilized over open structural framing, but can easily be used with a solid substrate.
The recommended substrate is 5 /
8
" plywood with a 30 pound felt moisture barrier. To avoid panel distortion, use
a properly aligned and uniform substructure.
Lengths under 5'-0" are available with some cutting restrictions. Please consult your Metal Sales branch for
maximum panel lengths and recommendations (see PGI-2 and PGI-3 for locations).
Panels are available in 24 through 16 gauge. Minimum quantities may apply.
Custom capabilities include:
-Perforated panels for wind screens and liner panels.
-Depth of panel.
Direct Fastened (exposed).
The fastener selection guide should be consulted for choosing proper fasteners for specific applications. Quan-
tity and type of fastener must meet necessary loading and code requirements (see PGI-12-14).
Steel grade 50, per ASTM A-792. Optional material: stainless steel, weathering steel, copper, and aluminum.
 * Acrylic Coated Galvalume ® (ACG) / ASTM A-792 - AZ55  Multi-Pass Kynar
 Prepainted Galvalume / ASTM A-792 - AZ50  Marbilique
 MS Colorfast45 ®  Plastisol
 ** Fluorocarbon (PVDF)  Polyester
* Differential appearance of Acrylic Coated Galvalume roofing materials is not a cause for rejection.
** Meets both Kynar 500 and Hylar 5000 specifications.