Memmert IPS Peltier-cooled incubators - Manual (Page 12)

12 D24034 | Date 10/2014
Construction and description
2.5.2 Ethernet interface
The Ethernet interface is intended for appliances which meet the requirements of
IEC 60950-1.
Via Ethernet interface, the appliance can be
connected to a network to read out protocol
logs with the AtmoCONTROL software. The
Ethernet interface is located on the rear of
the appliance (Fig. 3).
For identification purposes, each appliance con-
nected must have its own unique IP address.
Setting the IP address is described on page
32 .
With an optional USB to Ethernet converter,
the appliance can be directly connected to a
computer / laptop (see Optional accessories on
page 15).
2.6 Designation (nameplate)
The nameplate (Fig. 4) provides information about the appliance model, manufacturer and
technical data. It is attached to the front of the appliance, on the right behind the door (see
page 10).
Typ: IPP 260 F.-Nr.: 0109.0088
230 V~ 2.3 A 50/60 Hz 525 W
DIN12880-Kl.3.1 Nenntemp.: 70 °C
1
2
3
4
5
6
10
8
9
7
Fig. 4 Nameplate (example)
1 Type designation
2 Operating voltage
Type designation Type designation
3 Applicable standard
Operating voltage Operating voltage
4 Protection type
5 CE conformity
Protection type Protection type
6 Address of manufacturer
7 Disposal note
8 Nominal temperature:
Disposal note Disposal note
9 Connection / power ratings
Nominal temperature: Nominal temperature:
10 Appliance number
Connection / power ratings Connection / power ratings
Fig. 3 Ethernet interface