3 setup, 1 ip address, Setup – Memmert IPS Peltier-cooled incubators User Manual
Page 32: Ip address, Subnetmask, Unit, Timer mode, Max alarm, Display, you can set the following parameters, A network)
32
D24034 | Date 10/2014
Menu mode
All other settings can be made accordingly. The settings possible are described in the follow-
ing sections.
If no new values are entered or confirmed for approx. 30 seconds, the appliance automati-
cally restores the former values.
7.3 Setup
In the
SETUP
display, you can set the following parameters:
►
the
IP address
and
Subnetmask
of the appliance's Ethernet interface (for connection to
Subnetmask
Subnetmask
a network)
►
the
Unit
of the temperature display (°C or °F, see page 34)
►
how the digital backwards counter with target time setting works (
Timer mode
, see page
34)
►
the type of the slide-in unit (Grid or Shelf, see page 34)
►
the trigger temperature of the monitoring function (
Max alarm
, see page 34)
►
Remote control (see page 35)
►
Gateway (see page 35)
If the SETUP menu contains more entries than can be
displayed, this is indicated by the display “1/2”. This
means that there is a second „page“ of entries.
To display the hidden entries, use the turn control to
scroll beyond the lowest entry. The page display changes
to “2/2”.
7.3.1 IP address
If you want to operate one ore more appliances in a network, each appliance must have its
own unique IP address for identification. By default, each appliance is delivered with the IP
address 192.168.100.100.
LAN 1: 192.168.1.233
192.168.1.216
LAN 2: 192.168.1.215
LAN 3: 192.168.1.241
Editor
Programmname
Simulation
Protokoll
-
+
-
+
INP 250 Test 01
180
.0°C
i
HPP 250 Labor
i
37
.0°C
44
.4%rh
5
5
STAND BY
Programm
n
e
g
n
u
l
l
e
t
s
n
i
E
l
l
o
k
o
t
o
r
P
t
ä
r
e
G
e
f
l
i
H
n
e
k
c
u
r
D
AtmoCONTROL
Fig. 18
Operation of several appliances in a network (schematic example)
Setup
Unit
IP adress
255.145.136.225
Subnet mask
255.255.0.0
Alarm Temp
°C
F
Timer mode
TWW
TWB
1/2