MBT Lighting CX1603 User Manual
Page 10
10
Ⅴ、
Slide the MASTER fader from top to bottom position, the pattern to be executed by one step and the step
counter to be increased by one(shows 11:02), now the channel 1 indicator is full and A is off, B is full . Slide
the MASTER fader up, the B indicator is decreased and the B indicator is increased in intensity. the channel 2
indicator is and channel 1 indicator is decreased in intensity. When the MASTER fader is top position, the B
indicator is off and the A indicator is full, the channel 2 indicator is full and the channel 1 is off, the step
counter is increased by one (shows 11:03).
Ⅵ、
Repeat these settings to execute the pattern step by step.
6.
RUN PATTERN IN LOOP CHASE MODE
In LOOP CHASE mode, select the patterns to run them in sequence and in the periodic cycle.
For example, run the 31st, 41st and 51st pattern is LOOP CHASE mode.
Ⅰ、
Press CHASE button to enter CHASE mode.
Ⅱ、
Press PATTERN+ or PATTERN- till the LCD shows 31: XX.
Ⅲ、
Press LOOP button, the LCD turns to 31: LP.
Ⅳ、
Press PATTERN+ till 41: XX and then press LOOP button.
Ⅴ、
Press PATTERN+ till 51: XX and then press LOOP button.
Ⅵ、
The 31st, 41st and 51
st
patterns are executed in sequence and cyclically for 10 seconds, then the pattern
shown in the LCD is executed.
7.
DUMP BLIND
Enable or disable CHASE mode to dump BLIND.
8.
LATCH FUNCTION
The levels of LATCH buttons are independent from FADE TIME, and when ADD/KILL indicator is lit it
doesn’t impact with the levels of the channel faders.
9.
DELETE PATTERN
In PROGRAM mode, press SHIFT+DELETE PROGRAM to delete present pattern, the deleted pattern
wouldn’t be executed, once the deleted is alerted to be stored, it would be executable again.
INITIALIZATION & MEMORY DUMP
Press SHIFT button first, and then press LATCH 9, LATCH 13, . LATCH 10, LATCH 14, LATCH 11, LATCH
15, LATCH 12 and LATCH 16 in sequence, now release the SHIFT button, several seconds later, it is
initialized to the default mode(manual mode).
CAUTION!
This operation is harmful to the memory (PEROM), please be careful not to use it frequently.