MBT Lighting LED4EYES - Manual (Page 3)

Unpacking: Thank you for purchasing the LED4EYES. Every
LED4EYES has been thoroughly tested and has been shipped
in perfect operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping.
If the carton appears to be damaged, carefully inspect your
fixture for any damage and be sure all equipment necessary
to operate the unit has arrived intact. In the event damage has
been found or parts are missing , please contact our toll free
customer support number for further instructions. Please do
not return this unit to your dealer without contacting customer
support first.
Introduction: The LED4EYES is a three channel, The fixture
can operate in three different operating modes ; DMX
contorl, sound-active, or in a Master/Slave configuration. For
best results use fog or special effects smoke to enhance the
beams projections.
Warning! To prevent or reduce the risk of electrical hock or fire, do
not expose this unit to rain or moisture.
Warning!
This may cause severe eye damage. Avoid looking
directly into the light source at all times!
Features of LED4EYES
• Color Strobe Effect
• LED Chases (Adjustable Speeds)
• Built in Microphone
• DMX-512 protocol
• 3 Operating Modes - Sound Active, Show Mode, or DMX
Control
• DMX-512 Protocol Compatible
• 3 Operating Modes - Master/Slave; dmx-control; Sound Active
• Digital Display for Address and Function Setting
• RGBWA,five colors make charming effect.
On-Board System Menu . The LED4EYES comes with an easy
to navigate system menu. This next section will detail the functions
of each command in the system menu. Please read the next
section thoroughly!
To access the main menu press the ESC button. Tap the UP or
DOWN buttons until you reach function you wish to change. When
you reach the function you wish to change press the ENTER button.