8 print quality check, 9 setting the lcd contrast, Setting up the machine – Brother Fax 1360 User Manual
Page 11: 8print quality check, 9setting the lcd contrast, Set paper and, Press start, Is quality ok, Yes 2.no, Start cleaning
Setting Up the Machine
9
8
Print quality check
1
After the cleaning cycle is finished, the LCD
shows:
Set Paper and
q
Press Start
2
Make sure paper is loaded in the paper tray.
Press Start.
The machine starts printing the Print Quality
Check Sheet (only during initial ink cartridge
installation).
3
Check the quality of the block on the sheet.
Improper Setup
Avoid touching the printed surface of the
paper immediately after printing, the surface
may not be completely dry and may stain your
fingers.
4
The LCD shows:
Is Quality OK?
q
1.Yes 2.No
5
Do one of the following:
If all lines are clear and visible, press 1
(Yes) on the dial pad to finish the quality
check.
If you can see missing short lines, press 2
(No) on the dial pad and go to step
6.
6
The LCD shows:
Start Cleaning?
q
1.Yes 2.No
7
Press 1 (Yes), the machine will then start
cleaning.
8
After cleaning is finished, press Start. The
machine starts printing the Print Quality Check
Sheet again and goes back to step
9
Setting the LCD contrast
You can adjust the LCD contrast for a sharper and
more vivid display. If you are having difficulty seeing
the LCD from your position, we recommend changing
the contrast setting for improved viewing.
1
Press Menu, 1, 6.
2
Press a or b to choose Dark or Light.
3
Press OK.
4
Press Stop/Exit.
Contrast:Light
Contrast:Dark
OK
Poor