beautypg.com

1 user manual, Control system, 2 connecting control unit – Mayline RGE User Manual

Page 11: 3 resetting unit on first use

background image

11

Control System

5.1 User Manual

5.2 Connecting Control Unit

1.

Mount the control unit to the desktop in the desired location.

2.

Connect the motor cables.

3.

Connect the power unit to the control unit and the power outlet.

4.

Remember to reset the unit on first use.

5.3 Resetting Unit On First Use

Before the table can be used, the control unit must be reset to establish the lowest point of the table. This

is achieved by first lowering the table as far as it will go. Until this is done, it will not be possible to elevate

the table.