BenQ PE5120 - Manual (Page 7)

7 Safety, regulatory and legal information
Safety instructions (continued)
7. The lamp becomes extremely hot during
operation. Allow the projector to cool for
approximately 45 minutes prior to removing
the lamp assembly for replacement.
8. Do not operate lamps beyond the rated
lamp life. Excessive operation of lamps
beyond the rated life could cause them to
explode on rare occasions.
9. Never replace the lamp assembly or any
electronic components unless the projector
is unplugged.
10. Do not place this product on an unstable
cart, stand, or table. The product may fall,
sustaining serious damage.
11. This product is capable of displaying
inverted images for ceiling mount
installation. Please use BenQ’s Ceiling
Mounting Kit for mounting the projector and
ensure it is securely installed.
12. Do not block the ventilation holes.
- Do not place the projector on a blanket, bedding
or any other soft surface.
- Do not cover the projector with a cloth or any
other item.
- Do not place inflammables near the projector.
If the ventilation holes are seriously obstructed,
overheating inside the projector may cause damage
to the lamp, the projector to fail or result in fire.