BenQ PE5120 - Manual (Page 28)

28 Using the on-screen display menus
Setting menu
1. Language: Sets the language for the OSD control menus.
2. Mirror: The projector can be installed on a ceiling or behind a screen, or with one or more mirrors.
Contact your dealer for the ceiling mount bracket (optional accessory) if you need to install the projector
on your ceiling. Refer to page
14 for more information.
3. Keystone: Corrects any keystoning of the image. Refer to page 21 for more information.
4. OSD Time: Sets the length of time the OSD will remain active after your last button press. The range is
from 5 to 100 seconds.
5. Reset: Returns all settings to the factory preset values.
Advance menu
1. Source Scan: Sets whether the projector searches automatically for input signals. If the source scan is on,
the projector will scan for input signals until it acquires a signal. If the function is not activated, the
projector selects the last input signal.
2. User Logo: Enables the user to select which logo screen will appear during projector start-up. Three modes
are available: Default (BenQ logo), black screen or blue screen.
Information menu
This menu shows you the current operating status of the projector.
1. Source: Shows the current signal source.
2. Resolution: Shows the native resolution of the input signal.
3. System: Shows the Video input system format, NTSC, SECAM or PAL.
4. Preset Mode: Shows the selected mode in Picture menu.
5. Lamp Hour: Displays the number of hours the lamp has been used.
6. Color Temp: Shows the selected color temperature.