BenQ PE5120 - Manual (Page 19)

19 Connecting various equipment
Connecting video inputs
Connecting component-video devices
Connecting S-video or video device
If the selected video image is not displayed after the projector is turned on and the correct video source has been
selected, please check that the video source is turned on and operating correctly. Also check that the signal cables
have been connected correctly.
Connecting a computer
Note that the projector does not have a D-sub VGA analog video port. To connect to a computer, you will need to use
either a DVI-I Video digital cable, an RCA Video analog cable, or an S-Video cable.
AV equipment
Component Video cable
(optional accessory)
Game player
From audio
output terminals To audio input
terminals
Component Video cable
(optional accessory)
RCA Video
cable
S-Video cable
From audio
output terminals To audio input
terminals
S-Video or video device
DVI-I Video cable
From audio
output terminals To audio input
terminals