BenQ PE5120 - Manual (Page 6)

6 Safety, regulatory and legal information
Safety instructions
Your BenQ projector is designed and tested to meet the lastest standards for safety of information technology
equipment. However, to ensure safe use of this product, it is important that you follow the instructions
mentioned in this manual and marked on the product.
Safety instructions
1. To reduce the risk of electric shock, do not
disassemble this appliance. There are no
user serviceable parts inside. Take it to a
qualified technician when service or repair
is required. Incorrect reassembly can cause
malfunction of the projector or electric
shock when the appliance is subsequently
used.
2. Please read this user’s manual before you
operate your projector. Save this user’s
manual for future reference.
3. Refer servicing only to qualified service
personnel.
4. Always open the lens shutter or remove the
lens cap when the projector lamp is on.
5. Do not look straight at the projector lens
during operation. The intense light beam
may damage your eyes.
6. In some countries, the line voltage is NOT
stable. This projector is designed to
operate safely with a mains voltage
between 100 and 240 volts AC, but could
fail if power cuts or surges of
±10 volts
occur. In areas where the mains voltage
may fluctuate or cut out, it is recommended
that you connect your projector through a
power stabilizer, surge protector or
uninterruptible power supply (UPS).