Assembly guide (attach drum) – Marshalltown MIX3, MIX3-UK Wheelbarrow Mixer User Manual

Page 12

12 of 20

104 S. 8th Ave. Marshalltown, IA Phone 800-888-0127 / 641-753-0127 • Fax 800-477-6341 / 641-753-6341 www.marshalltown.com

WS1213

2-2014/Rev.A

ASSEMBLY GUIDE (Attach Drum)

8. Connect drum to output drive shaft (align drum over set screw) Hardware required: SET 5

Align set screw using a standard screwdriver,
perpendicular to mixer frame.

See Inset A

Drum will saddle set screw and fit tightly
on motor spindle.

Two washers placed on bottom of drum, secured with bolt.

Use a 22mm socket to tighten drum to motor spindle.

Assembly is easier with frame laying flat as shown.

Inset A