Mark Feldstein & Associates Fire Winder Wind Light - Medium - Manual

PLEASE READ THIS INFORMATION BEFORE YOU USE THE PRODUCT
AND RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE
Firewinder Original has been designed to be easy to install and enjoy,
however please ensure you have read these instructions carefully
before using the product.
• We recommend that you mount your Firewinder on a vertical wall or post using the
Mounting Brackets supplied to ensure safe operation at all times.
• Failure to follow these instructions may cause injury or damage to your Firewinder
or property
.
• Mark Feldstein & Associates, inc. and The Firewinder Company does not accept
responsibility for damage or injury that occurs to your Firewinder or property from
incorrect installation
.
• Firewinder is not a toy and should be used under supervision of an adult .
• If you require further guidance on installing your Firewinder, please visit
www.markfeldstein.com to see our step-by-step installation video and pictures
showing typical installation locations .
• NOTE: There is always a slight color variation with white LEDs (sometimes they
have a hint of blue/green) hence each Firewinder is subtly unique and slight color
variations will be seen at different wind speeds. This is perfectly normal.
PRECAUTIONS
• Use the Mounting Brackets supplied (see point
2. overleaf)
• Install Firewinder so that it stands vertically
• Ensure your Firewinder is installed in a place
where there is clear space for it to turn
• Consider the environment around your
Firewinder – i.e. don’t install Firewinder beside
a rapid growing plant or in a pathway where it
will get in the way of people, animals or
vehicles
• Take Firewinder down from its mounting
brackets if severe weather is forecast in your
area
• Get permission from whoever owns the
property where you plan to install your
Firewinder
• Install Firewinder in daylight when it’s not too
windy
• Install Firewinder onto a secure surface or
fixture that will not be damaged by the wind.
• Install Firewinder where it will not be struck
by moving objects, debris or swaying
branches
• Don’t break the laws of the land with your
Firewinder, directly or indirectly
• Installing Firewinder where winds are likely to
blow at over 60 mph is not recommended
• Ideally mount Firewinder with its base higher
than 5 ft. from the ground to avoid young
children or pets walking into it
• Do not attach anything to your Firewinder
• Do not immerse your Firewinder in water
• Trying to stop Firewinder from rotating by
hand may cause injury
• Do not abuse your Firewinder by swinging it
or attaching it to moving objects
• We do not recommend you paint or otherwise
decorate your Firewinder. It might affect
performance or cause injury or damage
• Do not open the casing or attempt any kind
of maintenance other than cleaning the
exterior
• Never clean with abrasives or chemicals.
These could damage the product or affect
performance
• Do not hang or suspend anything from the
base of your Firewinder
INSTALLATION INSTRUCTIONS
1. Check package contents
Please check to make sure that you have all the necessary parts in the box, these will include:
1 x Firewinder Original
2 x Mounting Brackets - both are slightly different
1 x Big Pin and 1 x Little Pin – provided in a plastic bag
2. Getting to know your Firewinder
Stand your Firewinder upright on a flat surface resting on the Bottom Fixing Point and hold the Top
Fixing Point with one hand. With the other hand, gently spin the Helical Wing. The lights will light up.
3. Identify the best place to install your Firewinder
Remember, you might find that the most pleasing place to install your Firewinder is not always the
windiest location, so we recommend spending some time to study how the wind flows around your
property before deciding where to make an installation. See
www.markfeldstein.com for pictures of
typical installation locations.
Make sure the place you choose to install your Firewinder is safe to access and that you have
permission to install it.
Once you have selected your desired location then consider the surface you intend to fix the
Mounting Brackets to. You will need to purchase four suitable screws or bolts in order to
install your Firewinder. It is your responsibility that the Mounting Brackets are fixed
securely. We do not provide these fixtures simply because of the variety of installation
possibilities.