Mark Feldstein & Associates 6, 10, 14 3 Piece Flameless LED Candle Set in Jute with Timer - Manual

I N S T R U C T I O N S
1. Install 3 “C” batteries (not included) into the bottom battery
compartment by removing screw from cover.(A) Recommended
to use alkaline batteries. Make sure battery polarity (+/-) is as
indicated.(see B) Replace battery cover and secure with screw
2. Use the On-Off-6HR switch on the bottom of the candle to turn
LED to the ON, OFF or 6HR (6 hour timer)* position. (see C)
3. If not set to 6HR position, switch to OFF position when not in use.
*Built-In Automatic Timer Function. When switch is set to the
6HR position, the LEDs will turn on for 6 hours and then
automatically turn off for a period of 18 hours. If the 6HR
function settings are not changed, the LEDs will automatically
turn on and off at the same time each day.
Warning: The Candle is made from real wax. It is recommended that the wax candle be kept out of
high heat environments and not placed directly on a porous surface. Heat may cause the candle to
change shape, melt or bleed onto unprotected surfaces.
BATTERY NOTICE
Do not mix old and new batteries. Do not mix alkaline, standard (Carbon-Zinc), or rechargeable
(Nickel Cadmium) batteries. Replace all batteries at one time. To avoid leakage or explosion, do not
put batteries in fire. Remove batteries if consumed or if product is to be left unused for a long period
of time. Clean the battery contacts and also those of the devices prior to battery installation.
Maumee, Ohio 43537
•
www.markfeldstein.com
3 “C” Battery 6hr Timer Candle
(A)
(B)
(C)
ON
6HR
OFF
C
C
C