Theft protection, Switching on/off, Attaching the control panel – Blaupunkt 7 644 820 310 User Manual
Page 9: Switching on/off using button 1, Switching on/off using the vehicle ignition
63
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
➮
First, pull the control panel straight
off the device and then out towards
the left.
●
The device switches off after the
control panel is detached.
●
All the current settings are saved.
●
Any CD already inserted in the de-
vice remains there.
Attaching the control panel
➮
Slide the control panel from left to
right into the device’s guide.
➮
Press the left edge of the control
panel into the device until it clicks
into place.
Note:
●
When attaching the control panel,
make sure you do not press the
display.
THEFT PROTECTION
Switching on/off
There are various ways of switching the
device on/off.
Switching on/off using button
1
➮
To switch on the device, press but-
ton
1
.
The device switches on.
➮
To switch off the device, press and
hold down button
1
for longer
than two seconds.
The device switches off.
Switching on/off using the
vehicle ignition
The device will switch on and off simul-
taneously with the ignition if it is con-
nected correctly to the vehicle’s ignition
and if it was not previously switched off
using button
1
.
You can switch the device on even if
the ignition is off.
➮
Press button
1
.
Note:
To protect the vehicle battery, the de-
vice will switch off automatically after
one hour if the ignition is off.
SWITCHING ON/OFF