beautypg.com

Adjusting the volume – Blaupunkt 7 644 820 310 User Manual

Page 10

background image

64

Adjusting the volume

You can adjust the volume in steps from
0 (off) to 50 (maximum).

To increase the volume, turn the
volume control

2

clockwise.

To decrease the volume, turn the
volume control

2

anticlockwise.

Setting the power-on volume

You can set the default volume level at
which the device plays when it is
switched on.

Press the MENU button

9

.

Press the softkey

5

assigned to

the “VOLUME” display item.

Press the softkey

5

assigned to

the “ON VOL” display item.

Set the volume level that you want
using the volume control

2

.

Press the joystick OK

8

or the

MENU button

9

to close the

menu.

The settings are saved.

Note:
You can also set the power-on volume
to be the same as the volume level that
was active before you switched off the
device. To do so, press the softkey as-
signed to the “LAST VOL” display item
in the volume menu.

Risk of injury! If the power-on

volume is set to maximum, the vol-
ume level can be very high when the
device is switched on.
If the volume was set to maximum
before the device was switched off
and the power-on volume is set to
“LAST VOL”, the volume level can
be very high when the device is
switched on again.
Severe damage to your hearing can
be caused in both cases!

Volume mute

You can instantaneously reduce the
volume (mute).

Briefly press button

1

.

“MUTE” appears in the display.

Cancelling mute

Briefly press button

1

again.

or

turn the volume control

2

.

Telephone audio

If your car sound system is connected
to a mobile telephone, the sound sys-
tem's volume will be muted as soon as
you “pick up” the telephone. The tele-
phone call is then outputted over the car
sound system's loudspeakers. This re-
quires that the mobile telephone is con-
nected to the car sound system as de-
scribed in the installation instructions.

If the sound system receives a traffic
announcement during a telephone call,
you will only be able to hear the traffic
announcement after the call is finished
(in so far as the traffic announcement is
still being broadcast).

ADJUSTING THE VOLUME