Blaupunkt 7 644 820 310 - Manual (Page 27)

81
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
TIM
Note:
●
If you do not switch on the device
within a period of 72 hours, the de-
vice will turn off the TIM function
automatically.
Switching on TIM
If you want to switch TIM on again,
➮
whilst you are in radio mode, press
and hold down the TUNER button
=
for longer than two seconds.
The TIMPLAY menu is displayed.
➮
Press the NEXT button
4
.
The TIMSET menu is displayed.
➮
Repeatedly press the softkey
5
assigned to the “TIM ON” display
item until “TIM RECORD ON” ap-
pears in the display.
➮
Press the TUNER button
=
or the
joystick OK
8
.
The settings are saved.
Note:
●
After you switch off the device via
the vehicle ignition or using button
1
, the display will briefly show the
current setting (“TIM ON” or “TIM
OFF”).
Listening to stored traffic
messages
To listen to the stored traffic messages,
➮
whilst you are in radio mode, press
and hold down the TUNER button
=
for longer than two seconds.
The TIMPLAY menu is displayed.
The last message is played if traffic in-
formation messages have been record-
ed. The most recent message is num-
bered “TIM1”. The top line of the dis-
play shows the station name/frequen-
cy and below it the time of the record-
ing.
After the first message, all the other
messages are played in ascending or-
der.
“NO TIM AVAILABLE” appears briefly
in the display if no messages have been
recorded. After the last message is
played, the device returns to its previ-
ous mode of operation.
If you want to return to radio mode with-
out first listening to all the messages,
➮
press the TUNER button
=
or the
joystick OK
8
.
Selecting TIM messages
“TIM” and the message number are dis-
played on both sides of the display
alongside the top two softkeys.
If you want to listen to one of the dis-
played messages without listening to
the other messages:
➮
Press the softkey
5
assigned to
the corresponding display item:
“TIM1”, “TIM2”, “TIM3” or “TIM4”.
Recording traffic information
messages
Whilst the device is switched on it auto-
matically records traffic information if it
is receiving a traffic information station
and priority for traffic information mes-
sages is activated.
If you are listening to a station that does
not broadcast traffic information and you
switch the device off whilst the TIM func-