Blaupunkt 7 644 820 310 - Manual (Page 51)

105
DANSK
ENGLISH
DEUTSCH
FRANÇAIS
IT
ALIANO
NEDERLANDS
SVENSKA
ESP
AÑOL
PORTUGUÊS
AMPLIFIER/SUB-OUT TMC
TMC for dynamic navigation
systems
TMC stands for “Traffic Message Chan-
nel”.
Traffic reports are broadcast digitally
using TMC, which means they can be
used by compatible navigation systems
during route planning. Your car sound
system has a TMC output, which you
can use for connecting Blaupunkt nav-
igation systems. You can find out from
your Blaupunkt dealer which navigation
systems can be used with your car
sound system.
Amplifier/sub-out
The car sound system provides connec-
tions that allow you to connect external
amplifiers. You can also connect a sub-
woofer to the device’s integrated low-
pass filter. In order for this to work, the
amplifier and subwoofer must be con-
nected in the manner described in the
installation instructions. We recommend
you use well-matched products from the
Blaupunkt or Velocity product ranges.
Switching the internal amplifier
on/off
If you use external amplifiers, you can
switch off the device’s internal amplifier
(“INTERNAL AMP OFF” setting).
Note:
●
Please check this setting if the
loudspeakers do not emit any
sound.
➮
Press the MENU button
9
.
➮
Press the softkey
5
assigned to
the “VARIOUS” display item.
➮
Repeatedly press the softkey
5
assigned to the “AMP ON” display
item until the “INTERNAL AMP ON”
or “INTERNAL AMP OFF” setting
that you want is displayed. The
“AMP ON” softkey will be displayed
with a dark background if the inter-
nal amplifier is switched on.
➮
Press the joystick OK
8
or the
MENU button
9
to close the
menu.
The settings are saved.