Lenze IPC Operating System Windows CE Thin Client - Manual (Page 13)

Operation
"Configure" register
Configuring the connection (extended configuration)
3
l
13 LDCDP−11999 EN 3.0
Dialog Box Function
Computer Network name of the server. Both the network name and the IP address can be
specified.
User Name User name according to the user account created on the server. Behind the "User
name" it says "None specified" until a connection has been established for the first
time. During the connection establishment, a query with regard to the "User name"
and the password is carried out.
User Name: User name for the user account created on the server
Password: Password for the user account created on the server
Remember my password: If this control field is ticked, the access data are
transferred automatically during the following connections are established. The
"General" register shows further buttons for the configuration of the automatically
transferred user data.
[Delete] Delete automatically transferred user data. For every following connection, the
access data are queried.
This button is only available if the "Remember my password" control field has been
ticked during the entry of the user data.
[Edit] Open dialog for the configuration of the automatically transferred user data. In the
dialog the user name and the password can be edited.
This button is only available if the "Remember my password" control field has been
ticked during the entry of the user data.
Always ask for credentials If this control field has been ticked, the automatic transmission of the user data is
deactivated. At every connection establishment the user data have to be entered.
The [Delete] and [Edit] buttons are masked out.
This control field is only available if the "Remember my password" control field has
been ticked during the entry of the user data.
[Save] The parameters of the connection are written to the connection name.rdp file.
[Save As] The parameters of the connection can be written to an rdp file under any name.
[Open] The parameters of the connection are read from an rdp file.