Lenze EPM−H507 - Manual (Page 82)

Operation
Calling up alarm messages
6
l
82 EDBPM−H505 DE/EN/FR 6.1
6.4 Calling up alarm messages
ƒ Alarm messages
– are texts which appear because of a certain event (e.g. if an actual value
exceeds a limit),
– must have been programmed in the »HMI Designer« planning tool,
– can have a max.size of 4 lines of 30 characters each (normal character
size),
– are chronologically saved in an alarm register with time and date
stamping.
ƒ The second to last line contains a programmable message field. This field
indicates the numerical size of the variables activated by the message.
ƒ The last line shows the date and time when the message was initiated.
ƒ indicates an alarm message.
Symbols and characters used in alarm messages
Symbols 1) Characters used in the line for
date/time Meaning
> Alarm not acknowleged
# Acknowledged alarm but alarm reason still
available.
< Unacknowledged alarm but alarm reason no
longer available.
HELP Help is assigned to the alarm message. ( ^ 84)
1) If an alarm message has been sent several times, the symbol indicates the message
shown last.