Lenze EZN3A0055H045U - Manual (Page 33)

Safety instructions
Residual hazards
1
l
33 EDKZN3B045 DE/EN/FR 3.0
(
Stop!
Heavy device weight
The device is very heavy and must be lifted for the mounting.
Possible consequences:
ƒ Injury to persons, particularly backache when lifting and holding
the device, respectively
ƒ Injury to persons and damage to material assets due to the
device falling down
Protective measures:
ƒ The device must only be carried with a load bearing system such
as an indoor crane permitted for the device weight
ƒ Before the transport, the hoist, the load bearing system and
lifting accessories must be checked for sufficient payload and
faultless status
ƒ Do not remove the hoist and the lifting accessories until the
device lies safe on a stable surface or is finally mounted.
O
Warnings!
Conditions of Acceptability:
ƒ The filter EZN3A0120H012, EZN3A0088H024 and
EZN3A0055H045U shall be mounted into an enclosure providing
adequate spacings.
ƒ The terminals have not been evaluated for field wiring
connection.
ƒ These devices are only intended to be used with this
manufacturer’s inverters type EMB... having a controlled
overvoltage means as shown below:
– EZN3A0120H012
® EMB9341−E
– EZN3A0088H024 ® EMB9342−E
– EZN3A0055H045U ® EMB9343−E