Lenze ECSDKxxx - Manual (Page 62)

Installation check 5
l
62 EDKCSDK002 DE/EN/FR 1.1
5 Installation check
After completing the installation, check ...
ƒ The wiring for completeness, short circuit and earth fault.
ƒ The power connection (X23):
– Polarity of the DC−bus voltage supply via terminals +UG, −UG
ƒ The control connection (X26):
– Short−circuiting of charging current limitation depending upon connected
power supply module.
)
Note!
The next step consists of commissioning the drive system.
Relevant information can be found in the detailed documentation of
the connected power supply and axis modules.