Lenze ERBMxxxRxxxx - Manual (Page 24)

2 Safety instructions
General safety instructions
EDKRBM470R DE/EN/FR 5.0 24
l
H1sic_EN−COAs
2 Safety instructions
General safety instructions
}
Danger!
Disregarding the following basic safety measures
may lead to severe personal injury and damage to
material assets!
ƒ Lenze drive and automation components ...
... must only be used for the intended purpose.
... must never be operated if damaged.
... must never be subjected to technical modifications.
... must never be operated unless completely assembled.
... must never be operated without the covers/guards.
... can − depending on their degree of protection − have live,
movable or rotating parts during or after operation. Surfaces
can be hot.
ƒ All specifications of the corresponding enclosed
documentation must be observed.
This is vital for a safe and trouble−free operation and for
achieving the specified product features.
The procedural notes and circuit details provided in this
document are proposals which the user must check for
suitability for his application. The manufacturer does not
accept any liability for the suitability of the specified
procedures and circuit proposals.
ƒ Only qualified skilled personnel are permitted to work with
or on Lenze drive and automation components.
According to IEC 60364 or CENELEC HD 384, these are
persons ...
... who are familiar with the installation, assembly,
commissioning and operation of the product,
... possess the appropriate qualifications for their work,
... and are acquainted with and can apply all the accident
prevent regulations, directives and laws applicable at the
place of use.