Lenze E82ZAFSC010 - Manual (Page 43)

Commissioning
Before switching on
7
EDK82ZAFSC−010 DE/EN/FR 6.0
43
l
H1inbet−bevor
7 Commissioning
Before switching on
)
Note!
ƒ If you carry out the commissioning with a configuration different from the
Lenze setting, read the instructions on "Individual Settings" (
^ 45).
ƒ Make sure
– that you have correctly set the setpoint range with the DIP switch on
the function module ( ^ 44).
– that C0034 is adjusted to the settings of the DIP switch ( ^ 44).
Example: setpoint selection (0 V ... +5 V) via potentiometer at X3/7,
X3/8 and X3/9
ð
C0034 = 0, DIP switch 1, 2, 4 and 5 = OFF, 3 = ON