Lenze E82ZAFUC001 - Manual (Page 67)

Commissioning
Setting node address and baud rate
7
EDK82ZAFUC−001 DE/EN/FR 4.0
67
l
H2_set_node_addr_baud−Ueb−rate Hinweis
Node address setting
ON
1 6 2 7 4 3 8 5 9 10
ON
OFF
Fig. 1 Address assignment via DIP switch
)
Note!
If several controllers are connected to the network, the node addresses must
differ from each other.
ƒ If several devices are connected to the CAN network, the node addresses must differ
from each other.
ƒ The desired node address results from the sum of the values of switches (1 ... 7) in ON
position.
Switch Value
Example
Switch position Node address
1 64 OFF
16 + 4 + 2 + 1 = 23
2 32 OFF
3 16 ON
4 8 OFF
5 4 ON
6 2 ON
7 1 ON