Lenze E94AZMR - Manual (Page 33)

Safety instructions
Safety instructions for the installation according to UL
2
l
33 EDK94ZMR47XDB DE/EN/FR/ES/IT 4.0
(
Stop!
No device protection if the mains voltage is too high
The mains input is not internally fused.
Possible consequences:
ƒ Destruction of the device if the mains voltage is too high.
Protective measures:
ƒ Observe the maximally permissible mains voltage.
ƒ Fuse the device correctly on the supply side against mains fluctuations and
voltage peaks.
(
Stop!
Overtemperature
The mains filter may become hot if permissible limit values are exceeded
during operation.
Possible consequences:
ƒ The device may be damaged or destroyed.
Protective measures:
ƒ Wire the overtemperature disconnection with the digital DO2 output
according to circuit proposal.
2.3 Safety instructions for the installation according to UL
O
Warnings!
Conditions of Acceptability:
ƒ The products are only intended to be used for Lenze Drives E94ARNE0134
and E94ARNE0244.
– All test results are only valid for this Lenze Drives.
ƒ The devices are only evaluated for factory wiring use.