Lenze CS 9000 DVI Mounting Instructions - Manual (Page 32)

Installation
Mounting steps
Fixing the mounting frame to the wall
4
l
32 MA_CSx0xx DE/EN/FR/ES/IT 2.0
With add−on component
„
29.5
106
70
160

2
1
‚ ƒ
† ‡
6
0 0
2
3
3
4
5
1
4
3
4
CS57x0−011
How to proceed:
1. Prepare the wall for mounting the wall bracket
0.
– The mounting location and the installation material must provide for a
permanent mechanical connection.
2. Stick the self−adhesive seal
1 on the adapter plate 2 on the side with the
threaded bolts.
3. Screw the wall bracket 0 and the adapter plate 2 to the swivel adapter 3.
– 2 x 4 countersunk head screws M5 x 16 mm with washers Æ 5.3 mm
and nuts M5
4. Pull the connecting cable through the swivel adapter 3 and screw the
swivel adapter to the wall.
5. Screw the add−on component 4 to the threaded bolts of the swivel
adapter 3.
– 4 spacer bolts 5 on the inside/outside M5 x 20 mm
6. Stick the second self−adhesive seal 1 on the add−on component 4.
7. Screw the mounting frame 6 to the add−on component 4.
– 4 nuts M5 with washers Æ 5.3 mm
– 4 screws M5 x 8 mm with washers Æ 5.3 mm
Now you can connect the Command Station ( ¶ 33).