Lenze CS 9000 DVI Mounting Instructions - Manual (Page 29)

Installation
Mounting steps
Fixing the mounting frame to the support arm
4
l
29 MA_CSx0xx DE/EN/FR/ES/IT 2.0
4.2.2 Fixing the mounting frame to the support arm
Without add−on component

1 0
ƒ
6
‚
1 3
2
1
CS57x0−005
How to proceed:
1. Check support arm system for professional mounting and sufficient
carrying capacity.
– See support arm documentation.
2. Stick the self−adhesive seal 0 on the adapter plate 1 on the side with the
threaded bolts.
3. Pull the connecting cables 2 out of the support arm 3 and screw the
adapter plate 1 to the support arm 3.
– For screws see support arm documentation.
4. Screw the mounting frame 6 to the adapter plate 1.
– 4 nuts M5 with washers Æ 5.3 mm
Now you can connect the Command Station ( ¶ 33).