Labnet Z306 Hermle Universal Centrifuge - Manual (Page 36)

TRANSPORT / STORAGE / DISPOSAL
30 Z306 Instruction manual.docx
© Hermle Labortechnik GmbH
6. TRANSPORT, STORAGE AND DISPOSAL
6.1 Transport
Before transporting, take out the rotor.
Only transport the unit in the original packaging.
Use a transport aid for transporting over longer distances to fix the motor shaft.
Air temperature rel. humidity Air pressure
General transportation ‐25 bis 60 °C 10 bis 75 % 30 bis 106 kPa
6.2 Storage
During storage of the centrifuge the following environmental conditions must be observed:
Air temperature rel. Humidity Air pressure
in transport packaging ‐25 bis 55 °C 10 bis 75 % 70 bis 106 kPa
6.3 Disposal
In the event of disposing of the product, please observe the applicable legal regulations.
Information on the disposal of the electrical and electronic devices in the European
Community:.
The disposal of the electrical devices is regulated within the European Community by national
regulations based on EU Directive 2002/96/EC pertaining to waste electrical and electronic
equipment (WEEE).
In accordance with this, any devices delivered after 13/08/2005 on a business-to-business basis,
which includes the product, may no longer be disposed of in household waste. To document this
they have been marked with the following identification:
Because disposal regulations may differ from one country to another within the EU please contact
your supplier if necessary.