Labnet Z400 High Capacity Centrifuge - Manual (Page 8)

1.5 Accessories supplied with each centrifuge unit
2 Replacement fuses, 1 Instruction manual, 1 Tool for removing the rotor
1.6 Warranty
The centrifuge has been subjected to thorough testing and quality control.
In the unlikely event of any manufacturing faults occuring, the centrifuge and rotors
are covered by warranty for a period of one year from date of delivery.
This warranty becomes invalid in case of wrong operation, use on non-appropriate
spare parts or accessories and non-authorized modification of rotor or centrifuge.
The manufacturer reserves the right for any technical modifications of the The manufacturer reserves the right for any technical modifications of the The manufacturer reserves the right for any technical modifications of the The manufacturer reserves the right for any technical modifications of the The manufacturer reserves the right for any technical modifications of the
product in respect to technical improvement.
product in respect to technical improvement. product in respect to technical improvement. product in respect to technical improvement. product in respect to technical improvement.
2. 2. 2. 2. 2. Installation Installation Installation Installation Installation
2.1 Unpacking the centrifuge
The centrifuges are supplied in a carton. Remove the tightening
straps . Open the carton and take the centrifuge together with the styropore
packing out of the carton.
The instruction manual and the accessories mentioned under 1.5 should be kept
with the centrifuge.
2.2 Transport
Avoid impacts during transportation and do not drop the unit to perserve it from
being damaged.
2.3 Required space
The centrifuge should be installed on a rigid, even surface. The Z 300 and Z 400
should only be operated on a stable laboratory table/cabinet etc..
Balance the centrifuge with a spirit level.
To guarantee the necessary heat dissipation, the unit has to be placed in that way,
that there is a space of minimum 15 cm on each side of the unit.
Never place the centrifuge in positions subject to excessive heat, e.g., strong
sunlight, as the performance of the unit is based upon an ambient temperature
of +23°C.
Attention: Attention: Attention: Attention: Attention:
The new safety rules require a safety operation cycle of 30 cm around the
The new safety rules require a safety operation cycle of 30 cm around the The new safety rules require a safety operation cycle of 30 cm around the The new safety rules require a safety operation cycle of 30 cm around the The new safety rules require a safety operation cycle of 30 cm around the
centrifuge. Mark this area to indicate that no person and now dangerous
centrifuge. Mark this area to indicate that no person and now dangerous centrifuge. Mark this area to indicate that no person and now dangerous centrifuge. Mark this area to indicate that no person and now dangerous centrifuge. Mark this area to indicate that no person and now dangerous
material (e.g. comprising inflammable or infectious liquids) are present
material (e.g. comprising inflammable or infectious liquids) are present material (e.g. comprising inflammable or infectious liquids) are present material (e.g. comprising inflammable or infectious liquids) are present material (e.g. comprising inflammable or infectious liquids) are present
during centrifugation.
during centrifugation. during centrifugation. during centrifugation. during centrifugation.
!!!!!