Labnet 222DS Benchtop Shaking Incubator User Manual - Manual (Page 7)

BENCHTOP SHAKING INCUBATOR 222DS USER'S MANUAL
Page 7
 Press and hold encoder knob for more than 2 seconds. Temperature signal light
blinks. With rotating encoder clockwise (+) or counter-clockwise (-), set temperature
to desired value:
37.5
 37.5°C
POWER
 If you want to use the shaking incubator without temperature regulation - set OFF
on display. You get OFF function on display, when you rotate encoder under 0.0°C or
above 70.0°C.
POWER
 Press encoder knob.
 Speed signal light blinks. With rotating encoder clockwise (+) or counter-clockwise (-
), set rotating speed to desired value:
34
 34 RPM
120
 120 RPM
POWER