Labnet 222DS Benchtop Shaking Incubator User Manual - Manual (Page 3)

BENCHTOP SHAKING INCUBATOR 222DS USER'S MANUAL
Page 3
1.0
GENERAL INFORMATION
1.1
DEFINITION
222DS BENCHTOP SHAKING INCUBATOR is a combination product of a shaker and a
temperature chamber, designed for shaking and heat treatment of sensitive samples. It
replaces two devices, reduces time and space needed. It is very suitable for biochemistry,
microbiology and medicine laboratories in which thermal and shaking treatment of samples is
a daily used routine.
1.2
KEY FEATURES
-
High temperature working range.
- Large environment temperature range - you can use device also in cold rooms.
- Digital readout of all parameters - you can read temporary or preset RPM, temperature,
time, acceleration, when device is running or when it is in stand-by mode.
- You can change parameter values while the device is running (except timer).
- Last parameter values reside in the memory even if the device was switched off.
- Precisely adjusted and maintained temperature regulation within 0.5°C of absolute
deviation from the set temperature in device working area.
- Incorporated HOLD and STEP time function with 1 minute resolution.
- Special parallel temperature protection for your safety.
- Error number combined indication of possible errors.
- Easy interchangeable platforms.
- Lid sensor.
2.0 TECHNICAL DESCRIPTION
2.1
CONSTRUCTION
The casing of BENCTOP SHAKING INCUBATOR is made of steel plate, varnished with high
resistant polyurethane lacquer. Temperature chamber lid is made of PMMA, which is
resistant to the temperatures up to 90°C.
Basic equipment consists of independent shaking device and temperature chamber. Both
sections are driven and regulated via microcontroller driven electronics, which also controls
all necessary sensors for motor speed, temperature, lid, temperature safety fuse, time and
self diagnostics error levels in variety of margin situations.